Anti-decubitus air cushionGenerally, it is controlled by an electric device. The airbags are connected through two air channels to divide the airbags into two groups. The air is alternately inflated and deflated to generate waves, which is equivalent to massaging the whole body of a person, promoting blood circulation, and allowing the skin to contact fresh air. Prevent bedsores, work continuously, without manual intervention, saving time and effort. The following small series introduces the use of anti decubitus air cushion and the benefits of anti decubitus air cushion.

the use of 1. bedsore cushion:

1. Laying decubitus air cushion: Be sure to place the tubular air cushion on the upward side. If it is placed upside down, it will affect the prevention and treatment of decubitus. When laying the air cushion, the air inlet should be placed at the foot end of the patient to minimize the impact of airflow noise on the patient.

2. When the anti-decubitus air cushion is placed on the mattress, the brown bed and spring bed must be placed on a layer of mattress first, and then the air cushion is placed on it to prevent the air cushion from being worn by the hard brown bed and spring bed.

3. When preparing to inflate, the mattress should be laid. The mattress must be inflated before it can be used normally. Generally, the initial inflation time is about 30 minutes.

4. When inflating, first check whether the pressure of the air pump is adjusted to high. During the initial inflation, adjust the power to the middle.

5. The surface of the air cushion must be covered with a layer of breathable cotton blanket (the thickness of the cotton blanket is determined by the climate, and the straw mat can also be laid in summer).

6. The strip air cushion is inflated by an air pump, and the inflation pipe can be connected with the air nozzle.

7. Open the carton package of the air pump, connect the air outlet on the air pump with the air pipe joint, and take air through the safety ring on the edge of the mattress to ensure that the duct is not bent.

8. The wave air mattress is placed flat on the bed, and the upper surface is covered with a layer of sheets, which can only be used by one person.

The advantages of 2. bedsore cushion:

1. Anti-bedsore air bed is developed according to the principle of physics. Three-stage circulating airflow design is adopted. With the fluctuation of air flow, the pressure part of the human body is automatically changed, which is specially used to prevent bedsore for long-term bedridden patients.

2. Anti-bedsore air cushion has two basic functions: one is to better disperse pressure, avoid pressure concentration and continuous pressure, and promote blood circulation. Second, the load-bearing interface has good ventilation and heat dissipation function.

3. The general cycle of anti-decubitus air cushion is once every 6-8 minutes, and the compressed parts of the human body are replaced every 6-8 minutes, which is equivalent to turning over the patient 7-10 times per hour, which is much higher than the number of artificial turning over. High-frequency rotation plays a role in massaging the whole body, promoting blood circulation and relaxing muscles. At the same time, the gaps caused by the waves make the air circulate naturally, allowing the skin to breathe fresh air for 24 hours. 4. The bedsore air cushion bed is made of non-absorbent fiber cloth. Perspiration and other liquids are not easy to adhere to the airbag, easy to wipe. Water-jet breathable bedspread can strengthen the prevention of urine penetration. The well-designed air mattress can also adjust the pressure index suitable for individuals according to their weight.

3. how to maintain anti-decubitus cushion?

1. The bedsore pad can be inflated immediately after buying it, but it is good to use it for 12 hours after the initial inflation. Because the tension bands and seams in the bedsore pad have a cushioning process, try not to use a new bedsore pad with sufficient air two days before use.

2. It is normal for the air bed to relax a little after filling once, and the size will be different from the target. The material of the air cushion bed is somewhat elastic, and some will become bigger and softer after being inflated, which makes it feel very relaxed. You only need to inflate again for a while to achieve the desired effect, but don't inflate too much.

3. Make sure that there are no sharp objects such as nails or thorns on the floor or bed frame where the bedsore pad is laid.

4. Seasonal changes. As the temperature rises, the gas in the bed expands. Watch out for deflation.

5. Do not over-inflate at any time, especially in summer, otherwise the tension band of the bedsore pad will be overloaded and broken, causing the bed surface to bulge and cannot be repaired.

6. When the temperature drops, the bedsore pad will become soft. Pay attention to gas. Any inflatable product, including tires, will naturally leak air, which is normal. Pay attention to regular gas supply.

Hebei Eryou Medical Equipment Co., Ltd. is a modern company integrating product development, production and sales. The company's main products include: turn-over nursing bed, anti-bedsore air cushion, nursing home bed, home nursing bed, electric nursing bed, ICU bed, medical bed, manual bed, nursing bed and other medical products. Our company is a key protection unit in Hengshui City, which is highly valued by leaders from all walks of life. The company was founded in 2001. The company was formerly known as Tengda Medical Device Factory in Hengshui Binhu New District. Now its production address is changed to: west of Xihuan Road, Jizhou City, Hengshui City, Hebei Province, and north of Yongxing Road (in the hospital of Jizhou Yintai Enterprise Service Co., Ltd.). So far, it has 20 years of production experience.